CHEMPUTE SOFTWARE - APRIL 2010 E-NEWS
======================================
SOFTWARE UPDATES
~~~~~~~~~~~~~~~~
PAULIN RESEARCH GROUP - Finite Element Analysis of Pipes/Vessels
====================================================
PRG has officially released its 2010 software. This includes
FE/Pipe 6.0, NozzlePRO 8.0, AxiPRO 3.0, MatPRO 3.0, and newer
versions of PCL Gold, MeshPro, Fitness for Service, FE107, FESIF,
FE661, and FEBend. Importantly, PRG2010 now includes the
mandatory ASME Section VIII, Div 2 A08 Addenda. For a full list
of new features, please go to:
http://www.chempute.co.za/anonftp/pub/PRG2010 Features.pdf
Users who are current with their maintenance have been sent a
notice reagrding this latest version, together with a download
link. If you have not received your notification, please contact
Chempute Software, or PRG directly. FE/Pipe users get free
access to NozzlePRO, AxiPRO, MatPRO, PCL Gold, MeshPRO, Fitness
for Service, FE107, FESIF, FE661, and FEBend. NozzlePRO users
now get free access to FE107 and FESIF.
Network users should note that PRG2010 has changed from a
server-side application to a client-side application. ONly the
security keys are now stored on the server. Please refer to the
latest install instructions included in the latest software.
INTERGRAPH CADWORX
==================
COADE has released a new build of INTERGRAPH CADWORX 2010 on 15th
April, 2010. This build includes compatibility with AUTOCAD
2011. Users of INTERGRAPH CADWORX 2010, who are current with
maintenance, can download this release from here:
http://www.coade.com/uploads/cadworx/2010/build/
TRAINING COURSES
~~~~~~~~~~~~~~~~
For training course information, visit the website pages below,
and download course schedules and registration forms. For
general enquiries, please contact Gail Dand (sales@chempute.com)
CADWORX Plant Training
====================
3-6 May, 2010
Chempute Software Training Centre, Sunninghill
Please contact Nicolas Michel (nmichel@chempute.com)
http://www.chempute.co.za/cadworxtraining.htm
http://www.chempute.co.za/cadworxpidtraining.htm
Fluid Flow Simulation using AFT FATHOM/ARROW/IMPULSE
=============================================
10-14 May, 2010
Chempute Software Training Centre, Sunninghill
R13,500+VAT
Presenter: David Miller, AFT (Colorado USA)
http:///www.chempute.co.za/afttraining.htm
4 CPD points allocated
ONLY A FEW PLACES LEFT
Process Flowsheet Simulation using CHEMCAD
==================================
24-28 May, 2010
Chempute Software Training Centre, Sunninghill
R13,500+VAT
Presenter: John Edwards (P&I Design, UK)
http://www.chempute.co.za/chemcadtraining.htm
3 CPD points allocated
ONLY A FEW PLACES LEFT
Pipe Stress Analysis using CAESAR
=========================
19-23 July, 2010
Chempute Software Training Centre, Sunninghill
R13,500+VAT
Presenter: Alan Stewart
http://www.chempute.co.za/pipestressanalysis.htm
5 CPD points allocated
Pressure Vessel Design using PVELITE
===========================
6-10 September, 2010
Chempute Software Training Centre, Sunninghill
R13,500+VAT
Presenter: Ray Delaforce (Intergraph, USA)
http://www.chempute.co.za/pressurevesseldesign.htm
5 CPD points allocated
FREE SOFTWARE CORNER
~~~~~~~~~~~~~~~~~~~~
TURBINE - Software for calculation of steam consumption in steam
turbines. This software is provided free of charge by Katmar
Software (Harvey Wilson/Wayne Jayes). Download a copy from:
http://www.chempute.co.za/anonftp/pub/turbine.zip
ADD USERS
~~~~~~~~~
If you have friends or associates who would like to be
ADDED to our mailing list, please have them e-mail us, or
provide us with a list of their e-mail addresses.
Best Regards
Dave Wickham (M.Sc.Chem.Eng, Pr.Eng.)
Chempute Software
Tel: 031-7646840
E-mail: sales@chempute.com
WWW: http://www.chempute.co.za
